Omnicast DAB/DAB+/T-DMB Modulator

The Omnicast DAB / DAB+ Modulator is a 1RU unit that accepts standard ETI signals and gives RF output at Band III for amplification and transmission. The unit is available with IF or L Band outputs as options.

FEATURES:

  • Fully compliant with DAB/T-DMB standards (EN 300401) / ETS 300 799
  • Efficient ETI input management for redundancy
  • MFN and SFN operation
  • Very high modulation performance
    • Signal Stability
    • Shoulder Level
    • Low Phase Noise
  • Linear and Non-linear Digital Pre-correction
  • Web Browser Control or local RS232/485
  • Dual redundant power supplies

The unit contains an embedded microprocessor controller which allows use of either IP via a LAN, WAN or Net connection or use of a modem with RS232/RS485 ports for monitoring via dialup.

The modulator is self contained with integral up-converter to Band III or L Band (option) allowing integration with most amplifiers to give a complete transmitter solution.

By using the Compass “Northpoint” GUI with a Java Webserver application incorporated that downloads to the monitoring PC on connection, the modulator can be monitored from any computer with a web browser.

All parameters of the modulator can be set from the GUI main page. Tabs allow selection of the other functions such as alarms.

History of alarms is kept on internal flash memory until acknowledged as well as parameters can be changed or monitored in realtime on the main GUI display.
Two standard ERTI inputs are provided with automatic switching to backup in case of failure of prime feed.

ETI Inputs: 2 by ETI NI or NA (auto detect) inputs compliant to G703 / G704 standards
Seamless auto switching
   
Outputs: Main output 0dBm 50 Ohms 174.928 to 239.200 Mhz
Options 30 to 40 Mhz in 1Hz steps or 1452 to 1492 Mhz (specify with order)
   
Clock and Synchronisation: High quality internal clock
  External inputs for 10Mhz and 1 PPS for SFN operation
  10 Mhz output available
   
Modulation: All DAB modes supported (Modes I, II, III, IV) with all protection profiles
  Dynamic reconfiguration, MFN or SFN , High MER, Adjustable Gest Factor
  Digital Non-Linear pre-correction. Linear Amplitude and Phase correction
   
General: Control via IP Java Web server and integrated microprocessor
  Dual power supplies
Dual AC inputs
220-240 volts AC 50 or 60 Hz
1RU rack mounting